Licensed, insured, and IICRC-certified mold removal done right the first time

Mold Remediation Company in WEST HILLS, California You Can Call 24/7

When mold shows up in your West Hills home, you need a Mold Remediation Company in WEST HILLS, California that answers the phone at 2 a.m. and shows up with a moisture meter, not excuses. We handle black mold, musty odors, and water damage mold from Canoga Park to Hidden Hills. Same-day inspection, upfront pricing, and a written clearance test before we call the job done.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Mold Remediation Service West Hills serving WEST HILLS, California
Careful work. Honest options.
About this service

What a Mold Remediation Company in WEST HILLS, California Actually Does

A Mold Remediation Company in WEST HILLS, California is a licensed contractor that finds the source of mold growth, contains it, removes contaminated materials, and restores the affected area to a dry, verified-clean condition. That means more than spraying bleach on a wall. We use a moisture meter and thermal imaging camera to trace hidden water, a borescope camera to check inside wall cavities, and an air scrubber with HEPA filters to keep spores from spreading through the house while we work.

West Hills homes deal with a specific set of mold problems. The Santa Ana winds dry things out fast, then winter rains push water into crawl spaces, attics, and stucco walls that never fully dry. Add a 30-year-old bathroom fan that stopped moving air years ago and you get bathroom ceiling mold before you ever see a leak. If you're searching for a mold removal company near me WEST HILLS, we handle the whole job: inspection, containment, removal, and post-remediation testing.

  • ✓ Same-Day Emergency Response
  • ✓ Licensed and Insured Crew
  • ✓ Clearance Testing Included
  • ✓ Upfront, Itemized Pricing
What's included

What's Included in Our Mold Remediation Service

Every full remediation job we run in West Hills includes the same core scope: inspection, containment, removal, treatment, and clearance testing. Add-ons like encapsulation, dry ice blasting, and HVAC cleaning are priced separately when the job calls for them. Here's what you get as standard.

✓

Full Inspection and Moisture Mapping

A certified inspector walks the property with a moisture meter, thermal imaging camera, and borescope camera. We map every wet area, document visible growth with photos, and identify the water source so the mold doesn't come back after we leave.

✓

Air and Surface Testing

We collect air samples from affected and control rooms plus an outdoor baseline, and surface samples from visible growth. Lab turnaround is 24 to 48 hours. Results identify species and spore counts so you know exactly what you're dealing with.

✓

Containment and HEPA Filtration

Work zones get sealed with 6-mil plastic sheeting and zip-wall doors. A negative air machine with HEPA filters keeps spores from drifting into other rooms. Technicians wear full personal protective equipment during removal and treatment.

✓

Removal and Disposal

Contaminated drywall, insulation, and porous materials come out and get bagged for proper disposal. Structural surfaces get HEPA vacuumed, then treated with a mold remediation chemical like Concrobium or RMR-86. Heavy growth on framing gets dry ice blasting.

✓

Antimicrobial Treatment and Fogging

After removal, we fog the space with Benefect or ShockWave to knock down airborne spores, then apply an antimicrobial coating to exposed framing. Crawl spaces get encapsulation materials to block future moisture. This step locks in the result.

✓

Post-Remediation Clearance Testing

We collect final air samples once the space is dry and treated, then compare spore counts to the outdoor baseline. If counts aren't back to normal, we re-clean at no extra charge. You get the lab report and a written workmanship warranty.

How it works

Our 5-Step Mold Remediation Process

01

Inspection and Testing

A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and borescope camera. We test air quality in affected and unaffected rooms, plus surface samples on visible growth. Lab results come back in 24 to 48 hours with species identification and spore counts. You get a written report with photos.

02

Containment Setup

We seal off the work zone with 6-mil plastic sheeting and zip-wall doors. A negative air machine pulls air out through a HEPA filter so spores can't drift into the rest of your house. Technicians suit up in personal protective equipment. Setup usually takes 45 minutes to an hour.

03

Removal and Cleaning

Contaminated drywall, insulation, and porous materials come out and get bagged for disposal. Structural wood gets HEPA vacuumed, then treated with a mold remediation chemical like Concrobium or RMR-86. For heavy growth on framing, we switch to dry ice blasting machine work, which strips mold without water or abrasive media.

04

Treatment and Encapsulation

After cleaning, we fog the space with Benefect or ShockWave to knock down airborne spores. Exposed framing gets an antimicrobial coating, and crawl spaces get encapsulation materials to seal out future moisture. This step is what separates a real mold abatement company WEST HILLS job from a surface wipe-down.

05

Clearance Testing

We run a final air quality and mold testing pass once the space is dry and treated. If spore counts aren't back to baseline, we re-clean at no extra charge. Most jobs clear on the first test. You get the lab report and a written workmanship warranty before we pull containment.

Tools & methods

Tools and Methods We Use on Every Job

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Moisture Meter

Pin and pinless meters measure moisture content in drywall, wood, and concrete. We use them to trace the water source and confirm the structure is dry before we close up walls.

Thermal Imaging Camera

Infrared imaging shows temperature differences behind walls and under floors, revealing hidden moisture and likely mold growth areas that a visual inspection would miss.

Borescope Camera

A small camera on a flexible probe lets us look inside wall cavities and behind baseboards without cutting large holes. We use it to confirm growth before opening up a wall.

Air Scrubber and Negative Air Machine

HEPA-filtered air scrubbers and negative air machines keep spores from spreading through the house during removal. Every containment zone runs one for the duration of the job.

HEPA Vacuum

HEPA vacuums capture spores at 99.97 percent efficiency at 0.3 microns. We vacuum all structural surfaces after removal and before applying any liquid treatment.

Fogger

Cold foggers apply a fine mist of antimicrobial solution to reach spores in areas a rag can't touch, like inside wall cavities and ductwork. We use Benefect and ShockWave.

Dry Ice Blasting Machine

Dry ice blasting strips mold from wood framing without water, chemicals, or abrasive media. It's our go-to for heavy growth on crawl space joists and attic rafters.

Real results

Before and after.

Bathroom Ceiling Mold in West Hills Ranch Home

Before

A 1965 West Hills ranch home had black mold across the bathroom ceiling and upper wall. The exhaust fan had been dead for years. Moisture readings in the drywall hit 28 percent, and air testing showed spore counts four times the outdoor baseline.

After

We removed 40 square feet of contaminated drywall, HEPA vacuumed the framing, treated with RMR-86, and installed a new 110 CFM exhaust fan. Clearance testing came back at baseline levels. Job took two days.

Crawl Space Mold in Canoga Park Rental

Before

A Canoga Park rental property had visible white and black growth on 60 percent of the crawl space joists. Moisture readings were 22 to 25 percent. The tenant had been complaining about a musty smell for months.

After

We removed contaminated insulation, HEPA vacuumed the joists, treated with antimicrobial coating, and installed a 12-mil vapor barrier across 850 square feet. Clearance testing passed on the first try. Job took three days.

Attic Mold After Roof Leak in Woodland Hills

Before

A Woodland Hills home had mold across 200 square feet of roof sheathing after a slow roof leak. The homeowner noticed a musty smell in the upstairs bedroom but couldn't find the source. Thermal imaging traced it to the attic.

After

We used dry ice blasting to strip the mold from the sheathing and rafters without water or chemicals, then treated with antimicrobial coating. The roofer fixed the leak. Clearance testing passed. Job took four days.

Problems we solve

Mold Problems We Solve for West Hills Homeowners

Most mold calls we get in West Hills trace back to one of a handful of causes: a slow leak nobody noticed, a bathroom fan that stopped working, or a crawl space that never dries out. Here are the problems we see most, and how we handle them.

Ask a pro →
01

Black mold behind bathroom walls

We cut out the affected drywall, HEPA vacuum the framing, treat with RMR-86, and check the exhaust fan. If the fan is undersized, we tell you what to replace. Clearance testing confirms the space is clean before we close it up.

↗
02

Musty odors with no visible mold

We use a thermal imaging camera and borescope camera to find the source, then test air quality in the affected area. Once we locate the growth, we contain, remove, and treat it. Odor removal mold treatment is included in every full job.

↗
03

Crawl space mold after winter rains

We remove contaminated insulation and debris, HEPA vacuum the joists and subfloor, treat with antimicrobial coating, and install encapsulation materials. We also check drainage and recommend fixes so the crawl space stays dry.

↗
04

Attic mold from roof leaks or poor ventilation

We test the sheathing and rafters, remove contaminated materials, and treat the framing with dry ice blasting when the growth is heavy. Ventilation fixes are part of the scope so the problem doesn't come back next summer.

↗
Proof you can check

Licensed, Certified, and Verified in West Hills

✓
IICRC Certification in Mold RemediationInstitute of Inspection, Cleaning and Restoration Certification
✓
ACAC CertificationAmerican Council for Accredited Certification
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA Safety TrainingOccupational Safety and Health Administration
✓
California Contractor LicenseCalifornia Contractors State License Board
Good questions

Frequently Asked Questions About Mold Remediation in West Hills

(833) 929-5837 →

Most West Hills mold jobs run $1,200 to $6,500 in 2026, with small bathroom or attic patches at the low end and full crawl space or multi-room remediation at the high end. Emergency calls, dry ice blasting, and encapsulation add cost. We give you an itemized written scope before any work starts, so you know the number before we touch a wall.

Check three things: a current California contractor license, IICRC or ACAC certification, and whether they include post-remediation clearance testing in the quote. A company that skips clearance testing is guessing. Ask for the lab report upfront. We provide all three on every job, and you can verify our license through the state board before you sign anything.

Yes. We hold a California contractor license and carry full liability and workers' compensation insurance. Our technicians are IICRC certified in mold remediation and OSHA-trained for containment and demolition work. We're happy to send a certificate of insurance to you or your property manager before work begins.

A full mold abatement company WEST HILLS homeowners hire should cover inspection, moisture mapping, air and surface testing, containment, removal of contaminated materials, HEPA vacuuming, antimicrobial treatment, fogging, encapsulation, and post-remediation clearance testing. We also handle water damage mold remediation, crawl space mold removal, attic mold, and HVAC mold contamination cleanup.

Ready when you are

Call the Mold Remediation Company in WEST HILLS, California Today

Mold spreads fast, and every day you wait is another day of growth inside your walls. We answer the phone 24/7, dispatch same-day for emergencies, and give you an upfront scope before any work starts. Call (833) 929-5837 and let's get your West Hills property tested, treated, and cleared.

Get a Free Quote (833) 929-5837 →
Request an appointment

Contact Our West Hills Mold Team

Call us at (833) 929-5837 or send an email to schedule your free mold inspection. We answer the phone 24/7 for emergency calls and return non-urgent messages within one business day. Our office is in West Hills, California, and we serve the surrounding communities including Bell Canyon, Hidden Hills, Woodland Hills, Canoga Park, and Northridge.

Request received — our team will be in touch shortly.
Tap to call(833) 929-5837