Musty odor that will not go away
We trace the odor with a borescope camera and moisture meter, find the source, and remove the growth. Odor removal mold treatment finishes the job so the smell does not come back.
Affordable Mold Remediation in WEST HILLS, California means a flat-rate quote before we cut a single piece of drywall. We handle black mold in attics, crawl spaces, bathrooms, and HVAC systems for homeowners and property managers across the west San Fernando Valley. If you have smelled that musty odor since the last rain, call (833) 929-5837 and we will be there today.

Affordable Mold Remediation in WEST HILLS, California is the process of containing, removing, and treating mold growth so your home passes a post-remediation clearance test. It is not a bleach wipe-down. We set up plastic sheeting and negative air machines, run HEPA vacuums over every affected surface, remove porous materials like drywall and insulation that cannot be saved, and apply antimicrobial coatings to the framing behind them. A moisture meter and thermal imaging camera tell us where the water is coming from before we ever start.
Most WEST HILLS calls we run start the same way: a slow supply-line leak under a bathroom vanity, a swamp cooler pan that overflowed in the attic, or a crawl space that stayed damp through the winter. By the time you see the black mold infestation, the colony has usually been growing for two to three weeks. That is why cheap mold removal WEST HILLS homeowners can actually afford starts with finding the water source, not just spraying the visible spots.
Every affordable mold remediation WEST HILLS California job we run includes the same core scope. If something falls outside it, like a plumbing repair or a roof patch, we tell you up front and give you a referral. No hidden line items on the invoice.
We map the affected area with a moisture meter and thermal imaging camera, then trace the water source with a borescope camera. You get photos and readings before we quote the job.
Plastic sheeting, zipper doors, and a negative air machine with HEPA filters keep spores from spreading into the rest of your home. This is standard on every job, not an add-on.
Contaminated drywall, insulation, and other porous materials come out, get bagged, and get hauled away per California waste rules. Disposal documentation is included in your final report.
Framing and hard surfaces get HEPA vacuumed, treated with Fiberlock or Concrobium, and sealed with an antimicrobial coating. Attic and crawl space jobs may also get a fogging treatment.
An independent lab runs air and surface samples after the work is done. You get the written report, usually within 48 hours. This is the document your insurer or buyer will ask for.
If mold returns at the same location from the same moisture source within the warranty period, we come back and re-treat at no charge. The warranty is transferable if you sell the home.
You describe what you are seeing and smelling. We ask about recent water events, the age of the home, and where the growth is. Five minutes on the phone usually tells us whether you need a full remediation or just a mold inspection near me visit.
A certified mold inspector walks the property with a moisture meter, thermal imaging camera, and borescope camera. We check the attic, crawl space, bathrooms, and HVAC closet. You get photos, moisture readings, and a written scope of work the same day.
We seal off the work zone with 6-mil plastic sheeting and run a negative air machine with HEPA filters so spores do not migrate into the rest of your house. This takes 45 to 90 minutes depending on the size of the affected area.
Porous materials come out. Framing gets HEPA vacuumed, then treated with RMR-86 or Benefect, then sealed with an antimicrobial coating. Attic and crawl space jobs often finish with a fogger or dry ice blasting machine for hard-to-reach surfaces.
We run post remediation mold testing with an independent lab, then walk you through the results and the repair list. Typical turnaround on the lab report is 24 to 48 hours. Once it clears, you get the paperwork and we close out the job.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Reads moisture content in drywall, wood, and framing. Tells us exactly how far the water has spread and where the mold is likely growing behind the surface.
Shows temperature differences that reveal hidden moisture pockets behind walls and under floors without cutting anything open. Saves you demolition cost.
A small camera on a flexible probe that lets us look inside wall cavities and ductwork. We use it to confirm growth before quoting removal.
Creates negative pressure in the containment zone so spores cannot escape into the rest of your home. Runs on HEPA filters and stays on for the duration of the job.
Captures spores and fine debris from surfaces and framing. Standard HEPA filters trap particles down to 0.3 microns, which is smaller than most mold spores.
Continuously filters the air in the work zone. We run these alongside the negative air machine on larger jobs to keep airborne spore counts down.
Removes mold from wood framing without chemicals or abrasives. Ideal for attic sheathing and exposed joists where you want to preserve the structure.
A homeowner in Woodland Hills noticed black mold spreading across the bathroom ceiling. The source was a slow leak in the upstairs shower drain. About 30 square feet of drywall was contaminated, and the framing behind it showed visible growth.
We contained the bathroom, removed the affected drywall, HEPA vacuumed and treated the framing with RMR-86, and sealed it with an antimicrobial coating. Clearance testing came back clean in 48 hours. Total job time: one day.
A property manager in Canoga Park called after a tenant reported a musty smell. The crawl space had standing water from the winter rains and visible mold on the joists and subfloor. About 600 square feet was affected.
We pumped out the standing water, removed contaminated insulation, treated the joists and subfloor with Concrobium, and installed a vapor barrier. Post remediation mold testing showed spore counts back to outdoor baseline levels.
A homeowner in Fallowfield had a swamp cooler pan rust through and drip into the attic for weeks before noticing. Mold covered about 200 square feet of sheathing and had contaminated the blown-in insulation.
We removed the contaminated insulation, dry ice blasted the sheathing to remove the mold without chemicals, treated the framing, and installed new insulation. Clearance testing passed on the first try. Job took two days.
Most of the calls we get fall into a handful of categories. If any of these sound familiar, you probably need remediation, not a dehumidifier and a prayer.
Ask a pro →We trace the odor with a borescope camera and moisture meter, find the source, and remove the growth. Odor removal mold treatment finishes the job so the smell does not come back.
We open the ceiling, find the water source, remove the affected drywall, treat the framing, and seal it. Most bathroom jobs finish in one day.
We remove contaminated debris, treat the joists and subfloor, and recommend encapsulation if the space stays wet. Crawl space mold removal is one of our most common jobs.
We test the sheathing, remove contaminated insulation, treat the framing, and document the fix. Attic mold testing and removal is handled in-house by our certified crew.
Most single-area jobs in WEST HILLS run $650 to $2,400 in 2026, with whole-house attic and crawl space projects landing between $3,500 and $9,000. Price depends on square footage, whether drywall and insulation have to come out, and how accessible the affected area is. We give you a flat-rate number before work starts.
Start by calling (833) 929-5837 for a same-day inspection. We charge nothing for the assessment and quote, so you can compare our number against anyone else's without spending a dime. Watch for companies that quote a low number and then add containment, testing, and disposal as line items later.
Yes, when the water source is fixed first. Remediation removes the mold; it does not stop the leak that fed it. We identify and document the moisture source during the assessment, and we will tell you plainly if a plumber or roofer needs to handle that part before we close out the job.
We offer financing options on jobs over $1,500, and we accept all major credit cards. If you are filing an insurance claim, we can bill the carrier directly on covered losses and provide the moisture readings, photos, and lab reports they need to process it. Ask about payment plans when you call.
Free inspection, flat-rate quote, and a crew that shows up when we say we will. If you have visible growth, a musty odor, or a recent water event, call now and we will get you on the schedule today. Licensed, insured, and warrantied.
Get Free Quote (833) 929-5837 →Call us at (833) 929-5837 or send an email to schedule your free mold inspection. We answer the phone 24/7 for emergency calls and return non-urgent messages within one business day. Our office is in West Hills, California, and we serve the surrounding communities including Bell Canyon, Hidden Hills, Woodland Hills, Canoga Park, and Northridge.